101-5000Solid Seat with L-Brackets
Pg. 1 price booklet

Standard solid seat with (2) pair of #413A L-brackets. This combination of hardware is designed to mount on many of the chair frames that have non-round rails. Angle adjustable double L-brackets bolt directly to the frame rail in the manufacturerís pre-drilled tubing or tracked rails. Double L-brackets are sent, although you may find single L-brackets will be sufficient, depending on frame tube styles. Backs are cut to fit between the rails unless otherwise specified. Seat is not quick release. Stainless steel L-brackets are available at no extra charge, upon request.

101-6000Solid Seat with Snaplock
Pg. 1 price booklet

Standard solid seat with (4) each #490 Snaplock frame clamps. This light-weight snap-in hardware is perfect when a full width seat is needed to mount directly on the seat rails and does not require adjustment angle. The hardware is designed to fit 1", 7/8" or 3/4" round tubing and cannot be mounted on folding chairs with separate side frame and seat rails (Double seat rails). This seat must be cut full width. Seat will come with 2" wide X 2" deep notches unless otherwise specified.

101-7000Solid Seat with J & L Brackets and
Pg. 1 price bookletQuick Release Brackets

Standard solid seat with (4) each #492 L-brackets, (4) each #414A J-hooks and (4) each #457 quick release frame clamps. 1", 7/8" or 3/4" drop hooks are available at no extra charge. The light-weight, lever release clamp is designed to fit 1", 7/8" or 3/4" round tubing. The adjustable J & L brackets allow change in seat to back angle and with the matching back hardware (102-7000), can allow you to tilt the system within the chair frame. Seats are cut to fit between the rails unless otherwise specified. Can be ordered full width with 2" wide X 2" deep notches. Stainless steel J & Lís are available at no charge upon request.