Seating and Positioning Catalog

Standard solid back with (4) each #490 Snaplock frame clamps. This light weight snap-in hardware is perfect, when a full width back is needed to mount directly on the back posts and does not require angle or depth adjustment. The hardware is designed to fit 1", 7/8" or 3/4" round tubing. This back must be cut full width. Curved wood can not be used with this hardware. I-modifications may be used and the foam can be curved, instead of wood.

102-7000Solid Back with J & L Brackets and Quick
Pg. 2 price bookletRelease Brackets

Standard solid back with (4) each #492 Crescent L-brackets, (4) each #414 J-hooks and (4) each #457 quick release frame clamps. Crescent L-brackets ensure mounting to backpost, regardless of back post angle. The light-weight lever release clamp is designed to fit 1", 7/8" or 3/4" round tubing. The adjustable J & L brackets allow change in seat to back angle and with the matching seat hardware (101-7000) can allow you to tilt the Backposts within the chair frame. Backs are cut to fit between the back posts, unless otherwise specified. Stainless steel J & L brackets are available at no additional charge, upon request.

102-7500Solid Back with ECONO-EZE Hardware
Pg. 2 price booklet

Standard solid seat with (4) each #462 frame clamps and (4) each #437A back mount forks. This hardware offers all the familiarity of our "Knob Release" hardware, with the ease of an independently mounted back. Four knob release points secure the back to the frame. Clamps are designed to fit all 3 standard sizes of round tubing and clamps are available to fit most non-round tubing currently on the market. Econo-Eze hardware offers seat to back angle and depth adjustable hardware to fit your clientís needs. Backs are cut to fit between the back posts, unless otherwise specified.

102-7500-LTSolid Back with ECONO-EZE Hardware
Pg. 2 price booklet

Standard solid back with 4 each #462 frame clamps and 4 each ECONO-EZE LITE back mount forks.